How to Program the Sanyo FXVR Remote

by Dean Lee
BananaStock/BananaStock/Getty Images

As with other multifunction remote controls, the Sanyo FXVR remote control uses manufacturer's codes to program the remote control. The FXVR remote can program up to three different devices. The devices can all be from a different manufacturer, though each device needs to be programmed separately. Although some manufacturer codes may not work, multiple codes are provided in the code list for you to try.

Step 1

Press down and hold either the VCR, TV or AUX keys at the top of the remote control.

Step 2

Enter the three-digit code for the manufacturer of the device you want to program from the code list included with your remote.

Release the VCR, TV or AUX key. If the small red light on the remote blinks, the code has been accepted. Try to turn on the device. If it does not turn on, repeat steps 1 and 2 with the next code for the manufacturer until you get a code that works.

References

  • "Sanyo Remote Control Owner's Manual"; Sanyo; 2005

Photo Credits

  • BananaStock/BananaStock/Getty Images

About the Author

Dean Lee began writing in 2008, with articles appearing on various websites. Lee is currently a network technician with both Cisco Certified Network Associate and Security+ certifications. Lee graduated from the University of Virginia with a Bachelor of Arts in economics and later completed a Master of Arts in communication at Regent University.

More Articles

×