How to Set Up a Belkin Wireless Router with Comcast
By Jason Taetsch
Updated September 28, 2017
There is no reason to stress about setting up your Belkin wireless router to work with your Comcast Internet service. Despite differences in hardware, wireless routers are designed to work with various products and services. The process will only take a couple of minutes and all you will need is a set of networking cables. The process is similar to connecting any home-level router to any ISP.
Remove the power cable from the rear of your Comcast cable modem.
Plug the Ethernet cable into the the "Internet" port on the modem.
Insert the other end of the cable into the "Internet" port on the rear of the Belkin wireless router. Plug the router's power supply into a nearby wall outlet. Plug in the power cord for the Comcast modem.
Insert the Belkin Setup CD included with the router into your computer's disc drive. Wait for the Setup Wizard to launch. Click "Setup" in the window that appears.
Type in the SSID and Password for the router into the fields provided. You can find this information on the Network Information Card attached to the side of the router. Click "Next" to set up the Belkin router with your Comcast Internet service. A "Success" message appears once the process is complete.
For added security, change the SSID and password after you have successfully configured the router to work with your Comcast service. Write these down on paper and keep them in a safe place.
Jason Taetsch graduated from The College of New Jersey with a degree in English. Taetsch co-founded the on-campus literary magazine, "Paperclips." In 2006 he began writing professionally. He wrote news articles and independently authored op-ed columns for the on-campus newspaper, "The Signal" and had articles published in "Garden State Surf Magazine."